Posts Tagged ‘text mode installation’

I have just installed CentOS 6.5 (minimal)  in Virtual Box on my Windows 8.1 pc. This is how I installed CentOS. Hope this helps.

[Update: The updated version of this article with screenshots for CentOS 6.7 can be found here.]

Requirements:

  1. CentOS 6.5 32-bit ISO : Download Link (~330 MB)
  2. Virtual Box : Download Link (~110 MB)
  3. Atleast 8 GB of free disk space.

Installation Procedure:

First, thing you need to  do is to set up your Virtual Box. Go ahead download and install Virtual Box (the download link is given above in the requirements).

Press “New“, Type Name as “CentOS 6.5 32 bit” or anything you want. Set the type as “Linux“, Version as “Red Hat 32 bit“. And press “Next”.

create vm

name and type of OS pic

Allocate RAM to 512 MB RAM or higher , then click “Next“.

select ram size pic

Then select the option “Create a virtual hard drive now “, then click on “Create“.

create hd pic

Select hard drive file type as the first option “VDI” , then click on “Next“.

hard disk type: vdi pic

Select type as “Dynamically allocated“. Choose the amount of hard disk space you want to allocate for your CentOS system. Select atleast 8Gb-10GB or higher and then click on “Create“.

VM HD size pic

Now, you would see the home screen of the Oracle Virtual box, Click on the CentOS VM you have created and then click “Start“.

start vm

Then click on the yellow folder icon and select the ISO file that you have downloaded.

Select ISO location

Then click on “Start“.

start boot

Wait for a few seconds and you will see the CentOS boot menu. Now, select the first option “Install or upgrade an existing system“.

Boot menu picture

 

[Note: To scroll through different options, you can either use the Arrow keys in your keyboard or the TAB key to move through different options . You may also use SPACE bar in your keyboard or ENTER key to make selections]

Now, you will probably get a message box saying “Disk Found” and if you want to verify the contents in the CD. Press “Skip”. If you need, you can press “OK” and verify the contents but it might take a while.

Using your arrow keys, select “Skip” and then hit “Enter“.

Disk check pic

loading screen

Hit “OK“.

CentOS Welcome

Now, select the language and then use the TAB key and then select “Ok” and hit ENTER.

select language

Now, select the model of the keyboardand then select “OK“.

keyboard selection pic

If you get a “Warning Message” such as the one below, just chooseRe-initialize all“.

Re-initialize all picture

Now, select your time zone and then hit “OK“. Then select a password for your “root” (or admin account), you can use TAB keys to reach the next box, and finally select “OK” and hit ENTER.

create root password

Now, select the option “Use entire drive“, and select “OK”.

allocate hard drive picture

Now, select “Write changes to disk” and the installer should start right up.

installation picture

installation progress pic

After, it is done installing , you will see a message saying “Congratulations, your CentOS installation is complete“. Select “Reboot” and hit ENTER.

installation complete -Reboot

Now, it should boot right up.

centos bootup picture

now, type login as: root , Then hit ENTER. Then type the password and hit ENTER. You should see now be able to see the terminal window with the # symbol.

root login pic

 

And voilà ! You have successfully installed CentOS 6.5 in Virtual Box.

This is a minimal mode CentOS and so many application packages are not installed. You will also have to configure the network to access the internet.

[UPDATE: To configure network in CentOS 6.5 (which is the same as configuring centos 6.3), I have made a detailed guide with screenshots, you can find it here.]

If you have any sort of queries on regarding this installation, just leave a comment and will get back at you. Don’t forget to follow my blog to get future updates! :D

Regards
ΞXΤЯ3МΞ

Advertisements

I have just installed CentOS 6.3 64-bit (minimal)  in Virtual Box. This is how I installed CentOS in Virtual Box. Hope this helps.

[Update: The updated version of this article with screenshots for CentOS 6.7 can be found here.]

Requirements:

  1. CentOS 64-bit ISO : Download Link (~330 MB)
  2. Virtual Box : Download Link (~90 MB)
  3. Atleast 8 GB -of free disk space

Installation Procedure:

First, thing you need to  do is to set up your Virtual Box. Go ahead download and install Virtual Box (the download link is given above in the requirements).

Press “New“, Type as “CentOS 64 bit” or anything you want. Set the type as “Linux“, Version as “Red Hat 64 bit“. And press “Next”.

Create VM

Allocate “Memory ” to 512 Mb or 1024 MB . You can increase this value according to requirements. And Press”Next“.

RAM

Then select “Create a virtual Hardisk Now” and press “Create“.

HD

Then choose “VDI” which is the first option, and press “Next“.

Hard Disk Type

Then choose “Dynamically allocated

Storage Type

Choose the amount of hard disk space you want to allocate for your CentOS system. Select atleast 8Gb-10GB . I have allocated 20 GB. And press “Create“.

Hard Disk Size

You would see the Virtual Box Home Screen. Now Press on “Start“.

start

Then press the small folder icon and choose the CentOS ISO file you have downloaded  earlier. And then press “Start“.

Select ISO

selected iso

Wait for a few seconds and you will see the CentOS boot menu. Now, select the first option “Install or upgrade an existing system“. And press “Enter” in your keyboard.

Boot menu

Now , it will take a few seconds to load.

loading

[Note: To scroll through different options, you can either use the Arrow keys in your keyboard or the TAB key to move through different options . You may also use SPACE bar in your keyboard or ENTER key to make selections]

Now, you will probably get a message box saying “Disk Found” and if you want to verify the contents in the CD. Press “Skip” as you are installing from an ISO file. If you need, you can press “OK” and verify the contents but it might take a while.

Verify Or Not

You would see a message “Welcome to CentOS” and then press “OK“.

Welcome Screen

Select the language and press “OK“.

Language selection

Select the model of the keyboard or just leave it to the default value. then press “OK“.

keyboard model

If you get a “Warning Message” such as the one below, just chooseRe-initialize all“.

Warning Message

Then select your time zone and (Press TAB) and then  “OK“.

time

Now, you will need to enter a password. This will be the password for the root user (or Administrator password). Then select “OK“. {Remember you can use the arrow keys or TAB to move through different fields or options in the screen}.

set root password

Now, select “Use entire drive” and then press “OK“.

Erase Disk

Now, press “Write changes to disk“.

write changes

Now, it will begin installing CentOS. It might take a while for it to complete.

dependencies check

installing screen

After, it is done installing , you will see a message saying “Congratulations, your CentOS installation is complete“. Select “Reboot” and hit ENTER.

Reboot

It will reboot now, and you will see the CentOS booting screen.

booting

CentOS booting

Now, you will see the login prompt as shown in the picture below. Now, Type the login as “root” and password as the password you entered during the setup.

login screen

After successful login  you will see a prompt as shown below with  # symbol at the end.

Succesful login and root prompt

And voilà ! You have successfully installed CentOS in your Virtual Box.

This is a minimal mode CentOS and so many application packages are not installed. You will also have to configure the network to access the internet.

[UPDATE: To configure network in CentOS, I have made a detailed guide with screenshots, you can find it here.]

If you have any sort of queries on regarding this installation, just leave a comment and will get back at you. Don’t forget to follow my blog to get future updates! :D

ΞXΤЯ3МΞ